Being an inch out can make a curtain look very different. We have heard from customers whose curtains dragged on the floor, and others whose Roman shades stopped above the bottom of the window. The first thing to check is not the tape measure. It is where the measurement began.
Ceiling height and curtain height are different measurements
A ceiling-to-floor measurement describes your room. Your curtain may begin below the ceiling, below a ring, or at a heading that sits above part of the hardware. Until you know that arrangement, the room height is not a confirmed finished curtain length.
This is why “always subtract two inches” is not a reliable instruction for every order. Different headings and different fittings do not necessarily place the top of the fabric in the same position.
Already have the rod or track installed?
That is a helpful starting point. Tell us whether you are using a rod with rings, a traverse rod, or a track. Then photograph the point where the curtain will attach and measure down to the floor.
For pinch pleat curtains on rings, the hook connects to a small attachment point on the ring. For a track, it connects to a carrier or glider. With grommets, the rod passes through the heading itself, and some fabric sits above it.
Do not interchange those reference points. A measurement from the bottom of a ring is useful, but it still needs to be interpreted for the hook position and finished heading you choose.
Decide what you want at the floor
Do you want the curtains just clear of the floor, touching it, or deliberately resting on it? Tell us in words as well as numbers. “Floor length” can mean different things to different people.
Here is a purely illustrative calculation: if the confirmed top of the finished fabric will be 90 inches above the floor and you want half an inch of clearance, the finished fabric length would be 89.5 inches. The crucial part is that the starting point is already the top of the finished fabric—not an arbitrary point on the rod.
Measure at more than one place along a wide installation and send the readings if they differ. That lets us discuss the result instead of discovering the difference when the curtains arrive.
No hardware yet?
Decide where the rod or track will sit before committing to the curtain length. Photos are useful for planning, especially when crown molding or a low ceiling limits the available space. They do not replace the final physical measurement.
For a particularly tight installation, confirming the hardware position first can remove an important uncertainty. There is no benefit in rushing a custom length while the hanging point is still undecided.
What to send us
Send the heading you want, the hardware type, a photo of the hanging point, the distance from that point to the floor, and your preferred floor finish. Tell us whether those numbers describe the opening or an existing curtain.
“Should I add one inch because the curtain has hooks?” Not automatically. The hook and heading relationship needs to be checked.
“Can I copy the length of a curtain that already fits?” Yes, that can be a useful reference when the replacement uses the same hanging arrangement. Tell us how you measured it so we do not adjust an already-finished measurement a second time.
You can also start with our measurement tool, then send the result for a check before ordering.